wcc1969

I found nothing wrong with her rudder, still in good shape! Will investigate engine mount whether all bushing or shimming are alright. Doubtfully, torque force is involved. Then, aileron adjustment may be also checked. Just preliminary investigation before calling my mechanic man to have a look anyway. Thank you all for advises. Werachat C. Bangkok, Thailand.

After engine overhauling and re-install Rotax 912 UL to my Sky Fox CA22, I found it goes to the right when cruising at 5200-5400 rpm since then. I need to hold stick to the left all the time to keep it goes straight. What would it caused by? Thank you for any advise.

I've tried once by replacing O-rings. It worked for few flights then back to same problem, leak and pressure loss.

Hi there, Problem on one of mater brake cylinder of my CA 22 skyfox is still exist! I would rather find new replacement parts for both sides is my best solution. I can not find any model or trademark on the original pump. Any suggestion where to find the right one to fit is much appreciated. I found some in Aircraftspruce's website USA but not sure which one to fit!

I've solved the problem. Just replace new rubber O-rings. It works ok now. Thank you anyway.

Anybody can suggest where to get replacement of master brake cylinder for my CA22 skyfox? Thank you in advance.

I found this thread is very useful containing lots of good information, especially for a newbie as myself. I am going to purchase a used Gazelle CA25N with Rotax 912 here in Thailand soon. Any recommends from you guys before the deal will be much appreciated.