spacesailor Posted March 6, 2019 Share Posted March 6, 2019 Smokeybear. I only need that prop for the monthly engine runs, No license (certification) so it';s not going anywhere but making noise. The engine I acquired had a "rich" cylinder. that I saw on "visual" had its rubber cap (on the side of the carbi" missing. . A bit of tube & a 22 shed-case plugged. that problem, then tuned it up, to exceed the recommended tacho speed. spacesailor Link to comment Share on other sites More sharing options...
Old Koreelah Posted March 20, 2019 Share Posted March 20, 2019 I fitted my Balance Master a couple of weeks ago. After lots of stuffing about trying to fit it in front of the prop, I gave up and just mounted it behind, between the drive hub and my spinner's back plate. Although the BM looks flat on one side, the mercury-filled tube protrudes about one mm, so bolting that "flat" face up against my spinner plate distorts it slightly. Lacking instruments to measure any difference in vibration, I can only report that it seems noticeably smoother when idling, so much so that it can now tick over down to 600 rpm, something it's never done before. 1 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now