Jump to content
  • Welcome to Recreational Flying!
    A compelling community experience for all aviators
    Intuitive, Social, Engaging...Registration is FREE.
    Register Log in
Sign in to follow this  
Skyranger2

What actual cruise speeds IAS do you get on your P2004 Bravo?

Recommended Posts

Yesterday took brutus Bravo to 2000 feet - OAT would have been 25 degrees - 150 kilos of pilot and fuel - no wheel fairings - standard timber prop

flew one way - then reciprocal back - it was a lumpy day and suspect plane was in lift and then sink .......... not the best day for record taking

 

rough recording was as follows - speeds were (REVs: IAS / GPS)

 

OUTWARD

 

5000: 103 / 95

 

5200: 104 / 94

 

5400: 119 / 110

 

INWARD

 

5000: 103 / 105

 

5200: 104 / 110

 

5400: 110 / 114

 

5600: 115 / 118

Share this post


Link to post
Share on other sites

John wrote, in part --

 

"rough recording was as follows - speeds were (REVs: IAS / GPS) ....."

 

Much thanks John!

 

Very useful info.

 

Per your results, taking them as "normal", if I didn't know anything else, I'd say the speeds/results we're getting were reasonably close to normal for the Bravo, except that we can never hit 5600 RPM (5350 is about max).

 

(And of course we have the evidence that our compression is noticably below optimal.)

 

If we take your results as "normal" we'd have to say that Tecnam's claimed cruise of 116 knots at 5500 RPM is a bit exaggerated.

 

And then again have that youtube video I mentioned where they happened to pan over a Bravo's instruments in level flight and I saw 129 knots.

 

So curious if you consider your compressions and power output normal?

 

Or to put it another way: If you by chance got your Bravo when it was new, have you noticed any loss of rate of climb?

 

Alex

 

 

Share this post


Link to post
Share on other sites

more than happy to continue talk Sky 2 (good for tecnam chatter)

 

Compressions and power normal ................. I believe

 

I'd say the higher you go the better your speed - don't think 2000 ft would be the optimum height ?

 

lets do a climb test - let us know your parameters and result and I'll do the same (suggest known aircraft weight and a ___________ knots ? entry speed and time say a 2000 foot climb at say ___________ knots ?)

 

Just beware the air in oz is much cleaner than the states so you'll be up against some stiff competition 080_plane.gif.36548049f8f1bc4c332462aa4f981ffb.gif

 

 

Share this post


Link to post
Share on other sites

Did I miss it ? or has know one given fuel consumption figures.

 

A pretty good indicator of how hard your donk is working is fuel consumption eg My Zephy routinely gets  (whole of sorti) 13 l/hr @ 100 knots 4800-500 rpm on a trip.  As low as 7-8 l/hr stooging around the training area 60 - 80 knots. My prop is a Fiti two blade ground adjustable, set for advantage climb - static RPM 5200 (tied to the fence)

 

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later for your post to be seen If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...