Jump to content
  • Welcome to Recreational Flying!
    A compelling community experience for all aviators
    Intuitive, Social, Engaging...Registration is FREE.
    Register Log in
Sign in to follow this  
MartyG

CH650 build cost

Recommended Posts

Marty knows the right way to do it- real homebrew.

 

Having good bending and cutting gear makes it so much easier and far more accurate . A big bender and shear are wonderful things and can be had cheapish used. Will pay for itself many times over a build and is ready to use anytime.

 

Having to pay for sheet metal work and the travel, waiting etc sucks

 

.

 

A smallish investment in gear say $3,000 will really save you heaps of money,time and anguish.

 

Then sell them when finished and get your money back if needed.

 

The same goes for a good compressor and air tools including riveter and a good rivet gun for solid rivets. A investment in the right tools make building fun

 

 

Share this post


Link to post
Share on other sites
The same goes for a good compressor and air tools including riveter

Have used air tools a good deal of my life but recent times electric tools have caught and surpassed as far as I'm concerned, electric rivet gun all the way for me thanks.

 

No more compressors going in the background or waiting for them to build up pressure, especially if you just want to pop a couple of rivets, no more leaks and airline repairs, lines going hard, forgetting to turn the compressor off when you leave ... ewww, you can have all that.

 

There's a fair few DIY bending brakes on Youtube, not real hard.

 

Do not use air or electric snips, they only stretch the edge and give you wrinkles. Get proper old style tin shears, secret is do not cut to the end of the blade, only go about 3/4s to 7/8s of the blade and you can get cuts almost as good as a shear ...

 

2627S-13-1.jpg

 

Do not make long cuts with this tin snip type below, but you do need left and right handed ones, eg; a pair each of red and green handled ones for cutting around corners and awkward spots ...

 

S0468.jpg

 

 

  • Like 1
  • Agree 1

Share this post


Link to post
Share on other sites

I guess it depends on the kit, the Vans and Zenair seem to offer the option to buy complete tool kits, whereas the ICP offers some items but all. I have only just started and so far have bought many useful tools some essential such as the rivet squeezer (DIY versions work too) edge roller, and frankly almost anything else I fancy or catches my eye. Then I have also spent money on preparation products paints and corrosion protection some good some not so good. I have already bought the minimum equipment including radio and Transponder. Other major costs I know of :

 

1 Propellor

 

2 Parachute (deferred to the end of the build)

 

3 Paint job

 

4 Entry fee for hangar space

 

5 some kind of EFIS/nav device (deferred as late as I can resist to benefit from future developments)

 

6 Insurance

 

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later for your post to be seen If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...