Jump to content
  • Welcome to Recreational Flying!
    A compelling community experience for all aviators
    Intuitive, Social, Engaging...Registration is FREE.
    Register Log in
Sign in to follow this  
Mike b

Is the Drifter Group still active?

Recommended Posts

Is the Drifter group still active? Seems most posts are years old, like me, or I’m probably doing something wrong.........I’ve got a Fisher Drifter and I like reading the old posts.....

 

 

Share this post


Link to post
Share on other sites
Is the Drifter group still active? Seems most posts are years old, like me, or I’m probably doing something wrong.........I’ve got a Fisher Drifter and I like reading the old posts.....

 

It probably wouldn't take too much to fire it up again.

 

 

Share this post


Link to post
Share on other sites
Is the Drifter group still active? Seems most posts are years old, like me, or I’m probably doing something wrong.........I’ve got a Fisher Drifter and I like reading the old posts.....

 

AS active as you choose to make it!!!!......Franco.  :wave:

 

 

  • Like 1

Share this post


Link to post
Share on other sites

Interest must have waned,i can't understand how such a simple plane isn't offered as a put together kit,or is it?

 

colin

 

 

Share this post


Link to post
Share on other sites

I'm  a bit surprised as well....As there still continues to be interest in the design and active flyers worldwide.

 

From memory, a few very old threads covering the topic of re manufacture mentioned alot of fabricated parts required and the labour out weighing potential sales costs.

 

The only way I can see it made new is in a lower labour cost country under "special" low taxation rules devoid of import/export tariffs. I have a few ideas on that.

 

Ideally with a 4 stroke engine, which I think is possible in this day and age, matching cost, power and weight requirements.(even electric?)

 

I believe the manufacturing rights are held by an Australian company and they are pretty much just sitting on it?

 

 

Share this post


Link to post
Share on other sites
Interest must have waned,i can't understand how such a simple plane isn't offered as a put together kit,or is it?

 

colin

 

One can buy a very very good Drifter or Thruster for only 10-15k now, so thats where the market is. A kit would have 9k in just the 582 and prop.  A 582 with rotax's e-tec would be as reliable and economical as any engine on the market, only available in snowmobiles atm.

 

 

Share this post


Link to post
Share on other sites

Give me an electric setup for my Drifter, that can give me the same performance as my current Rotax 503 DCDI, at a cost roughly equivalent to the 503 and keep me in the air for a minimum of 1 hour and I will fit it at the next engine change... At the moment, it looks like my next engine may have to be a Hirth,  

 

3202 2 cycle 55hp 3202thumb.jpg 

 

or the, 3203 2 cycle 65hp 3202thumb.jpgboth engines are free to air or fan cooled!

 

Franco.

 

 

Share this post


Link to post
Share on other sites
Give me an electric setup for my Drifter, that can give me the same performance as my current Rotax 503 DCDI, at a cost roughly equivalent to the 503 and keep me in the air for a minimum of 1 hour and I will fit it at the next engine change... At the moment, it looks like my next engine may have to be a Hirth,  

 

3202 2 cycle 55hp 3202thumb.jpg 

 

or the, 3203 2 cycle 65hp 3202thumb.jpgboth engines are free to air or fan cooled!

 

Franco.

 

Aerochute have been working on an Electric model for a while, 30 min flight time. 

 

https://www.aerochute.com.au/aerochute-electric/

 

 

Share this post


Link to post
Share on other sites
Aerochute have been working on an Electric model for a while, 30 min flight time. 

 

https://www.aerochute.com.au/aerochute-electric/

 

Thank You Mike, I wasn`t aware of it!... Hopefully, there will be electric capable of powering the Drifter before I get to old to use it!!!  :wink:  ... Seriously though, I would go electric!.......Franco.

 

 

Share this post


Link to post
Share on other sites

Hi all ,looking for some specs on the drifter mainly is there a max front seat limit, thought I'd read it somewhere once but can't find any reference to it anywhere now.

 

Cheers 

 

 

Share this post


Link to post
Share on other sites

 There's a minimum weight of the front seat occupant or you carry weight in the seat cushion.  There's probably a Max as well but it just makes it hard to stall.  Nev

 

 

  • Like 1

Share this post


Link to post
Share on other sites
Hi all ,looking for some specs on the drifter mainly is there a max front seat limit, thought I'd read it somewhere once but can't find any reference to it anywhere now.

 

Cheers 

 

The A503 manual says

 

Minimum front seat weight - 69Kg

 

Maximum front seat weight - 92Kg

 

The A582SB manual says:

 

Minimum front seat weight- 65Kg

 

Maximum front seat weight -95Kg

 

 

  • Like 1

Share this post


Link to post
Share on other sites

Use it as motivation..  I'm not sure about the smokes and laxettes You will get cramps and lung cancer. Give up sugar and anything processed and the weight will fall off.    Nev

 

 

  • Helpful 1

Share this post


Link to post
Share on other sites

Hi Gents,

 

A NZ Drifter Pilot, Kelly Martin is after some spare parts, original engine mounts for the Rotax upright 582.

 

A contact for a supplier appreciated that I will forward on.

 

Cheers

 

Rod Birrell

 

AirSports Flying School (Victoria)

 

[email protected]

 

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later for your post to be seen If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...