matto

Good effort by SAR. I was assuming the worst but holding onto hope untill something was confirmed. RIP Des and crew.

G'day Thomas, Thanks for the info on the minisport. I also will be following the progress of this sweet little thing. Hopefully a bit further down the track my circumstances allow for a project like this.

Congrats mate, all the best with it. Just asking as my sister received a place up here

Sounds like it would be a great weekend, hopefully gets the support it needs to get off the ground.

Do you have a mulitmeter? Set it on resistance(test by touching the leads together, 0 ohms means you have a short circuir or the right wire when testing the following) by holding one lead on a section of the plug and trying the other lead on the cut wires you will be able to work out which one goes where. Also if you break open your old switch you can see what colour goes where and replicate this on your new one. The resistor will prevent an open circuit and help eliminate initial transmission noise (click or pop when the button is pushed) but it will work without it. You should only need 2 wires

If you can post a wiring diagram from the radio manufacturer i should be able to assist

Not sure if anyone has mentioned the Bowen River Hotel. 20°32'21.87"S 147°33'14.61"E Great little pub with a strip 16nm west of Collinsville. Food, cold beer and accommodation available see http://bowenriverhotel.com.au/about-us.html for more details or call 07 47 853388 There is also a Rodeo held here queens birthday weekend in june

So Jake did you get offered a place at JCU?

Blue red and yellow one on ebay by any chance? There was one (3 were built in gladstone in the 80's) left at Rodds Bay when i started flying in 99' Yenn might be able to give you some contact details for the owner/builder of that one who is very knowledgeable

Have been living in Townsville for almost 10 years now and only flying when down in Gladstone. I recently flew the drifter from Rodds Bay to Montpelier Airpark just to the south of Townsville. That was a long day

There is lakeside airpark just east of bloomsburry. I think there are some members on the forum but not sure of who or contact details

Hi Hendonguy, I learnt to fly at Rodds bay as well as Old Station and Gladstone 13 years ago now. Kept the drifter there untill just recently when i brought it up north. You need to head south from benaraby on the bruce highway approx 9km then turn right onto rodds bay road. Head down this road for a few hundred meters and turn right at the first gate after the house on the corner copy and paste this in google maps to have a better look Rodds Bay Rd, Iveragh Queensland 4680 Hope this helps Matt

Thanks for the replys. Frank it is leaking along the join at the front of the tank. I am thinking about getting one made out of aluminium.

G'day everyone, I'm chasing a belly tank for our drifter . The current one has been repaired but is leaking again. I have talked to both the drifter factory and Wayne Fisher and have heard they are hard to find but thought that here would be the next best place to ask. If you know of anything please let me know Matt

R.I.P Pip You will be dearly missed My Dad grew up with pip and went to school together. I love hearing the stories that the old man has of the things the pair got up to in their younger years. I had the pleasure of meeting pip on numerous occasions and you honestly couldnt meet a nicer bloke. Many airshows round the country won't be the same. Our condolences to his family Matt Mckenna