flie43 Posted July 15, 2008 Share Posted July 15, 2008 Gazelle for Sale Gidday All Our club is selling it's beloved Gazelle. Below are the specs and some pics. It has a 2 bladed prop not a 3 as pictured because the 3 blader could not be used for training. Asking $44,000 + gst More info call Ben at the Wangaratta Aero Club 03 57213845 or respond to this post. Terry Registration 24-3639 Factory built by Skyfox Aviation Owner count 1 other Model: Gazelle Ca25n Airframe No. 085 Engine: Rotax 912A, 79BHP @ Max continuos power, liquid/air cooled, Approved for AVGAS or MOGAS Performance: TAS 80kts @ Max continuos power, FF 13.7L per hr, TODR 492m, LDR 354m Avionics: Intercome, 1 x icom VHF, 1 x GME UHF Engine hours: 1520 Attached Thumbnails Link to comment Share on other sites More sharing options...
Guest Pioneer200 Posted July 17, 2008 Share Posted July 17, 2008 Is the take off distance to 50ft agl? Link to comment Share on other sites More sharing options...
flie43 Posted July 17, 2008 Author Share Posted July 17, 2008 Yep, that should be to 50ft agl Terry Link to comment Share on other sites More sharing options...
Guest brentc Posted July 17, 2008 Share Posted July 17, 2008 I noticed that figure and thought it was a little off the mark. Whilst it's probably from the brochure, remember it would be at MTOW. That being said I used to operate my Gazelle out of a 300 metre strip 1 up and it went ok no dramas. 500 would suit for most occasions on bitumen / gravel, however you would need a bit more for wet grass. Link to comment Share on other sites More sharing options...
Wangaratta Posted January 6, 2010 Share Posted January 6, 2010 Did the Eurofox replace this? haven't seen it on the Aero Clubs Website, although apparently its getting updated. I thought you may have sold it and replaced it with the Eurofox because the WFTC hasn't got it on its website. Link to comment Share on other sites More sharing options...
Wangaratta Posted January 6, 2010 Share Posted January 6, 2010 Ahk. Good to hear its being looked after, haha. Link to comment Share on other sites More sharing options...
flie43 Posted March 8, 2010 Author Share Posted March 8, 2010 Enjoy her Cameron, she will be missed here in Wang. I will fly over soon and meet up with Sheldon for a weekend when I can find some time. Terry Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now