DKM1

The 212 solo looks good. I'll keep an eye out for your ad, good to hear.

Most oil company's do a race fuel, Shell sell a fuel called race 100. It works out about .20c to .30c a litre dearer them mogas.

CASA Discussion paper 1006AS closing date for comments, has been extended to the 14 December.

Casa Discussion paper 1006AS closing date for comments, has been extended to the 14 December.

Has anyone looked at the CASA discussion paper lately, I just checked and what I have just read is completely different to what was up there the other day.

US road standards OK. But I was referring to Australian design rule which would mean a lot more red tape, allot more them CASA could dream of.

It would have to meet ADR standards, which would double the cost to be road legal.

I just read the regs. The only part were you could be tested out side of air-side at a certified or registered aerodrome if. (calculation of position of freight. baggage, passengers and fuel on aircraft.)

Brumby

The landing gear on the Brumby is quite adequate from what I have seen and is one of the few Raa aircraft with a eleo nose leg.

Here are some pictures,I took a heap of then when I was at the factory I'm hoping to build one.

Well it,s a plan

Just a note the Brumby's are all aluminium it's the high wing version that has a chromemoly tube fuselage

Had a fly in a Brumby back in June very nice couldn't pick any faults with it.The guys at the factory are very helpful, you can also buy a quick build kit or you can buy it in stages.

Hi Bill

We supply to Fonterra and yes at least the weather is on our side at the moment, well hope it stays that way. Haven't been flying for a while, but it is a great outlet to just switch off relax and focus on being airborne:thumb_up:

Regards Daniel

P.S hope your have good season

Hi how many members are dairy farmers out their. Got my first milk cheque for the season yesterday and got a hole $0.23 cents a litre after the factory take out their cut.

At this rate I'll never get a new set of wings are eat.

Daniel

The Rans S9 and S10 are used for aero's and already fit the Raa reg's apart aerobatics of course

Hi Dazza

Very nice aircraft if you go to aircraft usergroups and lookup other rec aircraft,there are brumby threads their.

Hi Tony

YES, Soon I hope, just waiting on a few things to pan out.

Regards, Daniel

Brumby

Hi Tony

I,m sold I liked what I had seen at PG aviation very nice aircraft,had a good look around. Could have spent all day looking and talking to the guys their.

Regards Daniel:thumb_up:

Hi All

I stopped at PG aviation the other week, I'm very impressed with what I had seen. The Brumby is comfy plenty of room very nice at the controls and well built.

I want one and the wife even likes the look of it.

Regards Daniel

Thanks

Hi Tony

Thanks for your reply, I will be up your way on the weekend of May 30.

Would be good to have a look and a chat.

Regards Daniel:thumb_up:

it could start and thats where the trouble starts

The engine has been started again about 4 weeks ago,was talking to the bloke the other night.:raise_eyebrow:

Hi Brent

400 vs 450 you might know what is the difference is, as there is not much info around on the net for the 400.

Thanks Daniel

Many thanks for your reply to my email question.I gather they are amazingly expensive to import from Italy as a friend has just done this.

 

He must have got them from the supplier you mentioned.

 

He said that they were off a Vespa scooter, so hope to see if I can source some over the internet.

 

Some hope !!??

 

Many thanks again for your feedback.

 

Kindest wishes.

 

Roly (starting to get to know my new plane a bit better) !!!

If the brake pads are the same as a Vespa scooter,you can take them into any bike shop.

In the back of their brake pad supply book are diagrams of pads to match your pads up with the diagrams.

Then if you get a match spread the gospel

Hope this helps

:biggrin:Hi to all

Daniel from Tassie an Raa pilot currently wingless but hope to have a new set soon, good to be involved with the winged community.

Hi

Has any one had anything to with the Brumby LSA if so what is it like,

any info would be handy thanks.