Shu_downunder

Thanks. I just copy the description here for reference. Fitment: Compatible with 8000lb-12000lb winch with DC 12V (series wound and permanent magnet) Features: Made of solid and weather resistant steel and powder coated black surface for great durability.This winch solenoid contactor replacement come with shatterproof sealed and corrosion resistant case. It is designed to handle intermittent current loads of 250 amps for up to 10 seconds, requiring a 20-30 second cooling time between cycles,Wireless remote control kit 12V for winches up to 2000-5000lb.Easy to install and use, portable. Built-in antenna design,Remote range up to about 164ft(50m).Visual indicator light shows remote operation.Allows operator to keep clear of dangerous rigging.Operator can monitor winching or lifting from different positions. Weather-resistant receiver WATERPROOF design,Waterproof casing will protect the receiver from rain or coffee spill,Submerged in water operation is NOT recommended. Specifications: Condition: 100% Brand New Color: Black Relay + Black Receiver + Blue Remote Material: ABS ; Aluminum Alloy Operating Voltage: 12V DC Coil Rated Voltage: 6-110V DC --- Contact Circuit Voltage: 80V DC Operating Wattage: 15W Loading Current: Max. 250V AC 500A Environment temperature: -40°C - 85°C Frequency: 10Hz-200Hz Acceleration: ≤3.5g Speed: 60-100 per min Mechanical life: up to 100,000Ops Electrical life: up to 50,000Ops Operation Regulation: 50 Circle Control Range: Max. 150 feet Package Included: 1 x Winch Solenoid Relay 1 x Winch Receiver 2 x Remote Controls 6 x Covers 1 x Manual Notes: Each remote powered by 12V 23A battery, for safety reason, battery is not included in the package. Professionals install is highly recommended! Please note that there is a circuit switch (like a seesaw) inside the product, so when you shake the relay, there is a voice inside, not by the loose in the wiring or any defective issue. Thank you!

Thanks again everyone. These info really helps. I just altered my plan so the proposed garage is taking larger space from the old one I'm converting, or 7m long x 4m wide x 2.9m height. I reckon it would be enough to store some thing.

One of the reasons I'm thinking of parking at home, is that I would have opportunity to do more maintenance work. Not that I don't trust the more professional maintenance technicians, it's just a good chance to know better the machine that I rely on. If I can find an affordable hangar near home, that would be ideal for sure.

Thanks. It would be definitely a pain unless the the plane can stay on the trailer. However my garage does not have the height required. Saying that, would it be possible to do some maintenance in the garage, even though using hangar at other time? If so, How large would the garage need to be?

Thanks a lot @old Korelah @planedriver and @KRviator. I was a bit desperate yesterday. Now it seems be quite possible, just depends on whether I can figure out a practical way. I will do the new garage door with maximised height to make it possible.

I'm renovating my house and start to consider to do some alterations to my garage in case I need to park my future plane in it. I'm lucky enough to have a garage with a garage door with over 2.4m of clearance. The length is 7m and width is 4m. That should be enough to put in a light plane with wings folded. However, I'm not that lucky when looking at the driveway, the steepest section is close to 1 in 4, or 14 degrees. I guess I will have to manually pull the plane out of the garage, manage it through the very steep yet short (4m long) driveway, turn 90 degrees so it is parallel to the road, which is also not flat, then get it onto the trailer. Is it even possible?

Thank you @djpacro

Thanks @Garfly @rgmwa

Thanks. I will read it. Just to be sure, you mean the book, not the movie, right?

I wonder if there is a reading list for starters (and further learning of course)? Areas cover: - Aerodynamics - Meteorology - Airplane mechanics - Maintenance - Regulations - Communication and navigation - anything else? I've read a couple of books including Mike Busch's Engines and Airplane Ownership 1. I really find it's necessary to read more.

I'm training at Lilydale flying school and the aircraft is AEROPRAKT A32 VIXXEN. The pathway the school suggested was RAA --> RPL --> PPL. When transferring to RPL, The aircraft will be PIPER WARRIOR II

I already started taking jobs in NSW and TAS, dreaming I can fly to work one day...

What's U/L stand for please?

That's quite convincing!

Thanks, the flying club looks cool. I will check it out.