ducksrus

I spilled fuel on my "Makrolon" covered doors which immediately ate into it and destroyed the door. Not happy ! Makrolon is a polycarbonate like Lexan, so I am now looking at trying "Perspex" which is an Acrylic. Does anyone have any experience with this.

Paul, I used MEK. Couldn't find the Eposolv 70 anywhere. Scotch brite the ally sufaces then clean with MEK. Regards Ducky

Hi Paul, I bought mine through Bakers Industrial who I am sure will mail order. Product number 00681753. I was able to buy individual 50 ml dual syringe packs at about $ 27.50 ea. The 50 ml packs are great because you can meter out and mix small quantities. I went through about 8 packs. You don't need the applicator nozzle or gun, just insert two pieces of tube about 100mm long into the syringe pack and meter out onto an old margarine tub lid, and mix. Apply with a small spatular or similar. Ducky

No worries Mark, drop in any time. What is your email address so I can give you my details. Re your post # 63. I coated all my timber parts with Wattyl two part Estapol 7008 available anywhere and is completely compatible with the Stits products. Ducky (Steve)

Paul, All of my ribs, except first and last ribs had the T / Edge pre cut off. I can't remember the exact dist rear of the spar hole, but about 1/8". Rib 1 & 11 are full length. Happy to send some pics to your email address.

G'day everyone, I have just finished building my Aeropup S/n 18. It's taken 18 months (1400 hours). About to do the weight and balance and then the final insp. Hope to have her flying late jan early feb. have fitted a Jab 4 cyl. Glad to assist anyone who may have Q's or need help. Ducky