Jump to content

JG3

Members
  • Posts

    724
  • Joined

  • Last visited

  • Days Won

    22

Posts posted by JG3

  1. What is the best route to fly to Birdsville from Melbourne?

    If I was going from Melbourne I'd go by way of Broken Hill and Arkaroola. Those northern Flinders Ranges are really worth a look, and Arkaroola is an excellent overnight stop, with both premium and Avgas. Then up the Birdsville track with maybe a diversion to have a look at Lake Eyre. The Birdsville track is a wide highway these days so it's like one long runway if you have engine problems. It's about the safest place to fly of anywhere. And it does run through some spectacular desert country, much more interesting than the mulga country. Unfortunately Mungerannie airstrip is closed now, so if you are fuel limited for exploring the Lake then might have to figure on going across to William Creek for fuel.

     

    The 'desert' country of northern SA is much safer flying than than all that mulga scrub in western NSW. There's lots more opportunities for a safe outlanding in open areas. And of course follow the main roads whenever possible. They provide even better landing possibilities, and with lots of 4WD traffic these days to be of assistance if necessary.

     

    But whatever, do get up and go!

     

    JG

     

     

  2. hi KazI'm planning to take my dog flying with me. Where can I Buy Mutt Muffs???

    There was a woman pilot used to fly the 'Pink Panther' ultralight in SE Qld many years ago.

     

    Very good pilot, won the day at the spot landing comps at Watts Bridge one year.

     

    She carried her poodle everywhere in her little aircraft.

     

    Just wrapped his big furry ears down with an elastic bandage around and around the head.

     

    Then bundled the dog up like a baby and tucked it down beside the seat, with it's head just over the edge of the cockpit so it could see around.

     

    Dog seemed to love it, better than riding in a ute even.

     

    Of course the dog does have to have big floppy ears to do that....

     

    JG

     

     

  3. A couple of months ago I reminded everyone to periodically photocopy their log books in case of loss. Well, I'm sure glad that I did, cause I seem to have lost my Pilot's Log! Can't find it since we got back from the Centre trip. Hopefully it's just mislaid somewhere, but been through all the camping gear and corners of the aircraft, etc....

     

    So, another very strong reminder to make copies.......

     

    JG

     

     

  4. So, how do you book a tent/bed

    There's a big advert in the last RAAus mag. My mag is out at the airfield so I can't check it, but if the contact isn't in the ad, get back here and I'll put you in touch with someone who has made a booking. They said that there were few left, but they should be able to arrange more at this stage if the demand is there.....

     

    JG

     

     

  5. How many days do you think the the round trip from Kilcoy and back will take including the extra excursions on the way home.

    Cheers Dags

    Glad to hear you're keen, Dags. Hans is now planning on going as well, just doesn't want to miss out....

     

    It'll be two days out with overnight at Charleville, and two days back with an overnight probably at Eulo. If someone wants to include Lake Eyre, then it would be three days back, one day over the Lake to William Creek and overnight at Arkaroola, and then two days back along the Darling probably overnight at Bourke.

     

    JG

     

     

  6. It sounds like the Birdsville Races, Friday and Saturday, 3 & 4 of September, is the place to go this year! I already know of quite a few flyers planning to go from SE Qld, a couple of aircraft from Gladstone, several from Kilcoy, several from Boonah, probably one from Gatton, and at least one if not more from Gympie. Already that’ll be the best turn up of RA aircraft yet, and as the word spreads, I’m sure there’ll be more. I was there last year so don’t really need to go again this year, but will go anyhow just for the get together. The Birdsville Races gathering is a unique experience, and a real blast! Definitely an experience to remember. An account of my last year trip is at StolSpeed Aerodynamics - Performance Enhancement for Light Aircraft

     

    From SE Qld, Charleville is good for the first night stopover. They’ve always allowed airfield camping in the past, and walking distance to the RSL for a good feed. Then there’s the Cosmos Night Sky Observatory near the airfield if you haven’t seen it before. Next day a stop at Windorah for fuel, then into Birdsville mid-afternoon.

     

    To make it a round trip, probably come home by way of Innaminka, Dig Tree, Noccundra Pub, Eulo, Cunnamulla, St George. Innaminka has premium fuel but too far to carry, so need to beg a lift, but lots of helpful 4WD travellers around. Noccundra and Eulo both have convenient regular ULP, which I am satisfied to mix with some avgas remaining in the tanks to make a suitable blend. Eulo is a really nice place to camp for a night, water and toilets at the airfield and the pub just across the road.

     

    For flyers from NSW and Victoria, Milparinka is a charming overnight stop. Old sandstone buildings and evidence of gold mining boom days. Taxi to ULP pump. Food and drink at the pub.

     

    From Victoria and South Australia consider a route to overnight at Arkaroola, then William Creek for fuel and across Lake Eyre to have a look at the water and on to B’ville. While in W. Creek talk to the charter operators about routes and procedures over the Lake. It’s very busy airspace these days, with the operators flying routes and calling landmarks that are familiar to them.

     

    I’ve compiled a map of known fuel stops for southern Qld and western NSW at StolSpeed Aerodynamics - Performance Enhancement for Light Aircraft If travelling on Sunday, remember that callout fees often apply at airfields, and sometimes no service at all without prior notice…. Probably no fuel service at St George on Sunday. At Birdsville during the Races, the gate that’s handy for carrying PULP is locked, so it’s a l-o-n-g way to carry jerry cans. But the price difference to avgas is about a dollar a litre so that’s a saving of $22 for every carry.

     

    It’s always dry that time of year, but winds can be lively. The cycle is, increasing north/northeasterlies, followed by a strong southwesterly change that can blow really hard for a couple of days. So it sure is good if you can have flexible timing, and watch the pattern, so if you see a SW change coming just when you want to be going west, it’s best if you can go out a couple of days early to avoid a headwind slog, then ride the tailwind home. Be sure to bring good tie-downs….

     

    From the response to the story of our recent trip to the Centre, it sounds like there are quite a few flyers out there eager to go travelling x-country in their aircraft. Well, Birdsville would be a good trip to fit in this season. And don’t figure on leaving it too long…. Fred Brophy’s Boxing Tent won’t be around forever, and the whole Races event is becoming more and more commercial. Don’t listen to those who claim it’s not worth going cause it’s “not like it used to be”…. Yeh, maybe not, but it’s still a really unique experience that you won’t find anywhere else, and I say again, it’s a real blast!!

     

    Look forward to seeing you there,

     

    JG

     

     

  7. First very first thing I did was to disconnect the soft start module, and closely examine all connections, especially earth connections.

     

    I never actually removed the B module. Just replaced the A with a new one. With the new A in place, then the B was found to be able to start the engine by itself once again, and continues to work now. This might seem to indicate a connection problem that cured itself by disturbing the wiring, but that still doesn't fit the clue that both old modules always worked at speed, but neither would provide a starting spark.... The old A module still works at speed, but cuts out below 2500rpm. I now always start only on the B module in order to monitor it, and it's never failed again.....

     

    JG

     

     

  8. Hi JG,I was wondering if you could tell us how much extra weight would be added for your unique bicycle lid?

     

    Also, are you planning to offer this as an add-on kit to other Sav owners at some stage?

     

    Hank

    Gday Hank,

     

    The bike lid added 6.5kg. The bike itself weighs 12kg.

     

    And no, I'm not planning on getting into more manufacturing at this stage of life. But there has been some interest, so if someone is looking for an opportunity, they're welcome to it. In fibreglass it would be lighter and pretty easy to fabricate.

     

    JG

     

     

  9. JG3,You are missing the "GOTO" button which is if you press and HOLD the HOME button.

     

    I don't get any difference if I hold the HOME button or just press it. Both brings the page with DIRECT TO, but then same procedure as I indicated earlier.

     

    It is also possible to load the waypoints into ACTIVE FLIGHT PLAN, but that doesn't help for changes of plan along the way.

     

    JG

  10. I just came back from a 2700nm trip with my new Aero 500.

     

    Definitely mixed feelings.....

     

    Good points:

     

    Screen is brilliant! Very visible in all conditions.

     

    Compact so fits well on then panel.

     

    Press screen is not sensitive to false touches.

     

    Bad points:

     

    Press screen often needs a second press to register.

     

    When in keyboard mode, it often registers the neighbouring letter, so have to use 'backspace' a lot...

     

    Much more complicated procedures than the old Garmins for entering a user waypoint then going to it.

     

    To enter a new user waypoint is easy enough:

     

    HOME / POSITION / MARK WAYPOINT / enter name / OK / LOCATION / change coordionates / OK

     

    But then there is no way to go direct to that waypoint.

     

    First have to go BACK /BACK to get to HOME screen.

     

    Then to go to that waypoint there are two ways that I know of:

     

    1 - HOME / DIRECT TO / SEARCH BY IDENTIFIER / key in waypoint name / OK / ACTIVATE

     

    or

     

    2 - HOME / TOOLS / USER WPT list / select name / WAYPOINT INFO / hold down MENU button 3 seconds / ACTIVATE

     

    In the old Garmins once you had entered a new user waypoint, or highlighted a user waypoint in the list, all you had to do was press GO TO and it was done. I used to use that feature a lot, and really miss it......

     

    Maybe I'm missing a shortcut, and would be happy to be corrected.........

     

    I guess I'll get used to it, but I sure did prefer the old standardized Garmin procedures.....

     

    JG

     

     

  11. I don't think jumper leads could crank any faster than it does now. I have an almost new Odyssey battery right behind the firewall, with a heavy lead to the solinoid, and an earth lead directly to the starter motor. I have enough experience with starting engines in very cold conditions to know the importance of no-loss connections.

     

    With that old module, I could start on B module then switch B off, so running only on A. The A module would cut out as soon as the engine slowed to 2500rpm, tried it many times. No way could ever crank that fast....

     

    JG

     

     

  12. Yeh, Dags, we thought of you often, and wished you had been able to come along.

     

    Next time for sure, and there will be more trips for sure....

     

    As to planning and fuel stops, I'll write up a guide later when I can make the time. I just have a lot of issues to catch up on first, and resent spending too much time at the keyboard this time of year.

     

    Fuel and logistics are not a problem when you know where to go. It's quite doable in just about any aircraft, and sure is worth doing, so keep your dreams alive for next year.

     

    So that you can start by booking your holiday time, this is the advice from Ken Watts at Bond Springs, who's been flying out there for more than 40 years, and will welcome visitors to that airfield.

     

    Late April thru May -- cool to cold mornings - very good temperature inversions - warm days - light winds. Chance of frost late May.

     

     

     

    June thru July -- Cold frosty mornings - low level temp inversions with a higher inversion level at 5-7000 Ft. AMSL -- fresh and gusty winds associated with cold fronts moving across the Great Australian Bite. As we experienced, winter rain a possibility, usually from the same North West cloud band.

     

     

     

    August thur Sept -- Cool to cold mornings with a chance of frost -- warmer days - lighter winds - good temp inversions - diminished chance of rain.

     

    After 2nd week in September I always say that you can expect the weather to be getting hot.

     

     

     

    Late September you can expect the start of the equinoctial gales -- October defiantly with a slight possibility of cool mornings but hot days -- turbulence & thunderstorms.

     

    Tailwinds always,

     

    JG

     

     

  13. I finally replaced the A module with a new one. The old module on the A side would run once the engine was started on the B side, but wouldn't run below 2500rpm on just the old A module. Earlier on I couldn't get a starting spark on either the A or B module, but the B module now does start the engine. So I placed the Soft Start module on the B side, and always start on that side now in order to keep an eye on that module. I just did a 48hr cross-country trip with no problems. So the mystery is unresolved...... I sure checked thoroughly for bad earths and leakage, but couldn't find any problems.

     

    I note that the standard modules supplied by Rotax now have a soft start feature built in.

     

    JG

     

     

  14. Yeh, any of those aircraft could do the trip. All those strips that you need, such as Kings Creek Station, Curtain Springs, Bond Springs, and Kulgera Roadhouse are long, well-maintained dirt strips suitable for the Flying Doctor aircraft.

     

    I have a passion for going 'off-road', thus the big tires, but that's a whole different game....

     

    JG

     

     

  15. Gday All,

     

    I just got back from a grand flight to Alice Springs and The Centre. 2700nm round trip. Wish we were still out there, but a rain front was pushing in from WA.

     

    Went with Hans (701) and myself (Savannah) from Kilcoy, Roger and wife Kerrie (Savannah) from Caboolture, and Brian (Savannah) from Boonah. Went Injune, Rolleston, Longreach, Lark Quarry, Boulia, Mt Isa, Boulia, Bond Springs, West MacDonnell Ranges, Hermannsberg, Palm Valley, Kings Canyon, Henbury meteorite craters, Curtin Springs, Ayers Rock, Kulgera Roadhouse, then they went south to Lake Eyre, Flinders Ranges, Broken Hill, and are now following the Darling back home. I went east into the Simpson Desert and found an abandoned oil exploration strip and landed and stayed the night. Wish I could have stayed longer, but the approaching weather pushed me all the way home on a strong tailwind.

     

    Some photos are at:

     

    Picasa Web Albums - j.gilpin - Centre Flight...

     

    Cheers,

     

    JG

     

     

  16. I just finished fitting dual caliper Matco brakes in place of the single caliper that came on my Savannah.

     

    The improvement in braking effect is dramatic. Same master cylinder.

     

    And also no fade now, which used to be very noticeable when trying to stop downhill. The disc is much thicker and is steel instead stainless. Stainless is a very poor conductor of heat, so doesn't conduct heat away.

     

    JG

     

     

  17. Mike,

     

    I recognize that as a Permacool brand oil thermostat. Several of us have tried them and found disappointing results. I found the Thermo-Bob coolant thermostat to be much more effective, without all those hoses and hoseclamps running hot oil.

     

    JG

     

     

  18. Gday all Southerners,

     

    It seems like a good time for some of you in southern parts to start planning to fly up to Monto next year. We'd really enjoy seeing you again, and showing some real country hospitality. There's nothing quite like standing around a big open fire swapping aircraft stories, and sipping port, or whatever is your preference. It's a whole different experience from the formal and commercial feel of Temora.

     

    It's a really easy x-country flight, and a chance to see some new country; we've done it to Narromine so many times. The weather here is very dependable this time of year, with almost nil chance of rain. Daytime sunny and mid 20's, night time maybe a frost, but that won't bother you fellas, eh.

     

    So start planning, eh........

     

    JG

     

     

  19. In automotive comparison, the original Savannah looks like a real 4WD, which is just right for what it is. The S is trying to look like the pansy 4WD's meant for city use. I like the original much better.

     

    I've done video tuft testing on that square fuselage, and the airflow is much better than you'd expect. Nice clean flow, even at the corners. That rounded shape won't improve speed at all. Construction is so much easier with the square corners. I don't think it will be any lighter because of more complex internal framing.

     

    That's an interesting idea that the slab sides improves stability. It may well be so, because the Savannah is very stable in flight. I regularly fly x-country for hours at a time without touching the stick.

     

    JG

     

     

  20. The traditional 'aircraft aluminium' is 2024. It's stronger for it's weight, but very prone to corrosion, fatigue, and bend cracking. Most of the recreational aircraft these days use structural aluminium 6061, which is very corrosion resistant, and less prone to fatigue and bend cracking. It's an excellent material.

     

    JG

     

     

×
×
  • Create New...