Jump to content

Don J

Members
  • Posts

    166
  • Joined

  • Last visited

  • Days Won

    4

Posts posted by Don J

  1. Very interesting cable arrangement. Aileron cables arranged in torque tube look to be a problem solver. I would only study the over 90-degree return at pully of cable aft of rear spar ensuring no cable can touch under tension. Thumbs up Teggles

  2. 1 hour ago, facthunter said:

    "Trickey Dicky" but he did a few good things. Bugging the Democratic Convention wasn't one of them as it turned out. HE was one of the more intelligent ones. I'm not  being sarcastic there.  Nev

    You're not here but if you were, you'd see that a major change has been happening in the State levels such as Governors, Attorneys, and many high level personal. Biden just let 1500 federal prisoners out of jail and at least 2 people here where I live out convicted of embezzlement. I guess Biden figures if Trump can get away with 34 Felony's a few lesser misdemeanor persons should walk. Go Figure.

    • Sad 1
  3. 9 hours ago, onetrack said:

    Stop this talk right now, about asking disappointed Americans to come to Australia!  Do we really want a massive uncontrolled level of refugees arriving here, in any form of transport, from America? 😄

    Why not? I guess we can start sending all the persons coming in from South America to Australia. I personally am not disappointed with the US but I have lived through presidents since the JFK of the early 60's. Nixon was a interesting situation. 🤨

    • Like 1
  4. 10 hours ago, rgmwa said:

    Don, from what I understand North Dakota overall is pretty solidly pro-Trump. You obviously have a different opinion, as most of us here do. What's the general view of Trump in your neck of the woods?

     

    I personally voted for the other party as most all people I know. N.D. is a blue state as we say but I think it all boils down to money and supporters such as Musk and the fear of another January 6th episode from the past. My little community is basically all farmers and mainly only concerned about Ag details.

    • Like 1
    • Informative 1
  5. 43 minutes ago, facthunter said:

    HE calls Serving People "Suckers and Losers". HE wouldn't Know $#!T from Clay. Diddums, The Orange U Tan  would be a joke IF it wasn't so serious. He's YOUR C in C as you said,  and the rest of the World have just had their Trade AGREEMENTS Unilaterally Torn up. What's NEXT? .I speak to a lot of Ex-service USA people. So far They ALL seem to Like Trump??? I know some Higher Ups DON"T but I don't get to speak to THEM.   Nev

    Listening to world news tonight Elon musk has asked for the government not to pass the spending bill and if this happens many military personal will not get paid along with Federal workers. Boing is the least of this country's problem at this time. Like I said I'll try and keep you guys on that side of the pond informed as things develop. If any questions, please ask. 

    • Like 1
  6. Nev. I'm a born and raised American plane junky with years of USMC service so no way I will pull up and restart at this stage of life. Australia would be a great place to visit and spend time with the population. I guess that's one thing that bothers me is a commander and chief that has no training in combat with a bully attitude. I wonder if this wall he's building at the Mexico border is any better than the great wall of China???

    • Like 1
  7. 47 minutes ago, facthunter said:

    You're probably not alone. Come here and warn us of what might happen here.  Nev

    It is still about 1 month shy of what will come to fact in the good old USA because of procedures of the government but I can say that any person not legally allowed in the States will be hiding because of the threat of good "ol Trumpy poo" to export. I admit some need to go but most are just hard-working souls trying for a better life. I

    • Like 2
    • Agree 1
  8. "Finished" that sure would-be music to my ears when I can say it with my own mouth. It seems the closer to flight you get the farther away you really are.🤔 Cost of supplies has become a challenge in this neck of the woods along with shipping. Regardless of all the setbacks with a build having fun and enjoying the product is a thing a builder should keep foremost in their mind. 👌Along with safety......................

    • Like 2
  9. Hello everyone. Build of the Taylor monoplane is still going great and closer every day. Been watching all these drone issues on the east coast of the USA. Not too sure what to think of it but I hope it's just kids having fun. Hope you all have a good holiday season. Don

    788237559_a1fus.thumb.jpg.1f58b2d9fb573746a9a12615f09aa140.jpg

    • Like 4
  10. Looks great Teggles. It's a shame that all that gets hidden under plywood. Don't forget those hinge blocks on the inside of spar and I also mounted T-nuts before final ply was added. 1mm ply is tougher than I thought it would be to wrap around the leading edge but some soaking in hot water and a heavy 2" pipe worked wonders. Keep at it friend and keep us posted.

    t-mono.jpg

    • Like 1
  11. 4 hours ago, Teggles said:

    I am not so sure. It’s a 10% reduction in span but if I can keep the weight under control then the wing loading will be less than that. Why does John Taylor mention it on the plans? He must have done the numbers and was happy with it.

    Not sure of the reason either but I would guess it may have something to do with the length of the root spars option regarding placement of Main landing gear mounts. You can mount at root spar or wing root.

    • Informative 1
  12. Believe me Teggles with your fuel capacity and with the lower hp a shorter wing will not be liked. Now if you put a 0200 on it with shorter wings, we may find a spot at Reno air races going fast and turning left.😉

    • Haha 1
  13. 6 hours ago, Rhys1701 said:

     

    Would you happen to have a couple of photos of this please?

    I'm looking to convert mine from tail skid to steerable tail wheel

    Page 2 you will see the access holes are for the ability to get to the hinge bolts of the elevator and rudder hinges the tail wheel is a stock Scott full swivel type and activated by rudder horn.

  14. The top rudder hinge would be an easy transfer of holes to the VS you do have two bolts holding the hinge half on? Are you going tail skid or wheel? I used self-locking tee-nuts on the inside of my VS and HS along with elevator spar to ease in mounting and un-mounting of controls. then left enough thread to pass t-nut to add a ny-locking nut for further safety. Access holes had to be incorporated to pass a wrench inside to hold nuts and fabric patches will cover them for future access. How is the cable routing going? Hope all is well and happy flying Teggles.

    t-mono.jpg

    • Informative 1
  15. What is the plan on mounting the vertical Stab to the tail post? Are you going to use the hinge bolts? Don't forget those balsa strips that go on the leading edge of the rudder spar and elevator before fabric. Just think my friend only a few hundred things to do.🤪 Keep at it and keep use posted. DJ

    • Like 1
  16. 1 hour ago, Teggles said:

    Hi Don,

    No not yet. I will get the rudder and elevator on after I have finished the hinges and then use some string to see just how big a problem I have got!

    Rudder cables probably won't be too bad but depending on where elevator cables fair leads are positioned that may be a headache. Do you have support blocks on Horizontal Stab and rudder post at hinge locations? Also don't forget Sheet 2 of prints section C-C showing the balsa in center of spars under the fabric I almost forgot those, and gap would have been terrible. And keep in mind you need room for hinge pins to come out at least one side by the balsa on center of spars.👌

    • Helpful 1
×
×
  • Create New...