ozzietriker Posted August 27, 2014 Share Posted August 27, 2014 Hi, I have a faulty EGT Probe on my Rotax 912ULS engine which needs replacing. It is used with FLYdat system. Replacement of original is $290 (paying Australian criminal prices), does anyone know of a cheaper alternative/option? Thanks in advance Link to comment Share on other sites More sharing options...
Downunder Posted August 28, 2014 Share Posted August 28, 2014 Any of these look OK? http://www.mglavionics.com/html/mgl_accessories.html Pulled from a forum...... I had a duff EGT probe on my 912S with flydat. The £180 for a new probe, was not going to happen, its plain extortion by ROTAX. Since they are standard K type, which can be sourced for £35 from Parts for Aircraft, bolt type made by MGL Avionics. They have sold many for Rotax engines without trouble and the replacement probe has metal braided lead 1 metre length which works beautifully 1 Link to comment Share on other sites More sharing options...
rgmwa Posted August 28, 2014 Share Posted August 28, 2014 Try Lockwood Aviation. I think this is the one, but check with them to make sure. https://www.lockwood.aero/p-2542-clamp-on-egt-probe-1-12-to-2-clamp-1-tip-4-lead-nd.aspx Should be a lot cheaper even with postage. Ask for USPS International Mail, no tracking. rgmwa Link to comment Share on other sites More sharing options...
Downunder Posted August 29, 2014 Share Posted August 29, 2014 I went to buy some stuff from Lockwood. They wanted scans of documents. Drivers licence or passport and CC (front and rear). I purchased elsewhere..... Link to comment Share on other sites More sharing options...
rgmwa Posted August 29, 2014 Share Posted August 29, 2014 I went to buy some stuff from Lockwood. They wanted scans of documents. Drivers licence or passport and CC (front and rear).I purchased elsewhere..... That's odd. I bought some stuff from them a while back without any problems. It was 2 years ago though. rgmwa Link to comment Share on other sites More sharing options...
crashley Posted August 29, 2014 Share Posted August 29, 2014 http://www.horshamaviation.com.au/ Link to comment Share on other sites More sharing options...
AVOCET Posted August 29, 2014 Share Posted August 29, 2014 Soun I went to buy some stuff from Lockwood. They wanted scans of documents. Drivers licence or passport and CC (front and rear).I purchased elsewhere..... sounds like a precursor to identity theft ! Unless you were ordering C4 Link to comment Share on other sites More sharing options...
Ultralights Posted August 29, 2014 Share Posted August 29, 2014 thats strange, i have ordered from Lockwoods in florida before, no need for any docs, just like any other website, last order i placed with them was about 3 months ago now. Link to comment Share on other sites More sharing options...
ozzietriker Posted August 29, 2014 Author Share Posted August 29, 2014 Any of these look OK? http://www.mglavionics.com/html/mgl_accessories.htmlPulled from a forum...... I had a duff EGT probe on my 912S with flydat. The £180 for a new probe, was not going to happen, its plain extortion by ROTAX. Since they are standard K type, which can be sourced for £35 from Parts for Aircraft, bolt type made by MGL Avionics. They have sold many for Rotax engines without trouble and the replacement probe has metal braided lead 1 metre length which works beautifully Thanks Downunder & just placed my order :) Link to comment Share on other sites More sharing options...
flyvulcan Posted August 29, 2014 Share Posted August 29, 2014 I ordered a set of EGT probes from Lockwood for my 912ULS only 2 weeks ago with no hassles whatsoever. They were shipped the day after I ordered them. Link to comment Share on other sites More sharing options...
ozzietriker Posted August 29, 2014 Author Share Posted August 29, 2014 Try Lockwood Aviation. I think this is the one, but check with them to make sure.https://www.lockwood.aero/p-2542-clamp-on-egt-probe-1-12-to-2-clamp-1-tip-4-lead-nd.aspx Should be a lot cheaper even with postage. Ask for USPS International Mail, no tracking. rgmwa Lockwood just got back to me, they sell them for $195 USD Link to comment Share on other sites More sharing options...
ozzietriker Posted August 29, 2014 Author Share Posted August 29, 2014 I ordered a set of EGT probes from Lockwood for my 912ULS only 2 weeks ago with no hassles whatsoever. They were shipped the day after I ordered them. Can you give me Lockwood's part number of those probes please. Link to comment Share on other sites More sharing options...
Downunder Posted August 29, 2014 Share Posted August 29, 2014 That's odd. I bought some stuff from them a while back without any problems. It was 2 years ago though.rgmwa This was March 2013..... $700us order.......wouldn't budge on the requirements after contacting them.....their loss..... New Credit Card authorization form.docx New Credit Card authorization form.docx New Credit Card authorization form.docx Link to comment Share on other sites More sharing options...
flyvulcan Posted August 29, 2014 Share Posted August 29, 2014 Sorry, I was wrong. It wasn't Lockwood (that was my oil cooler stuff), it was a Grand Rapids Technologies that I got my EGT probes from. Here's the link http://www.grtavionics.com/EISandAccessories2-26-14.pdf Hope it helps. Cheers, Dave 1 Link to comment Share on other sites More sharing options...
Downunder Posted August 29, 2014 Share Posted August 29, 2014 Sorry, I was wrong. It wasn't Lockwood (that was my oil cooler stuff), it was a Grand Rapids Technologies that I got my EGT probes from.Here's the link http://www.grtavionics.com/EISandAccessories2-26-14.pdf Hope it helps. Cheers, Dave Looks like some really good prices there !!! Link to comment Share on other sites More sharing options...
ozzietriker Posted August 29, 2014 Author Share Posted August 29, 2014 Sorry, I was wrong. It wasn't Lockwood (that was my oil cooler stuff), it was a Grand Rapids Technologies that I got my EGT probes from.Here's the link http://www.grtavionics.com/EISandAccessories2-26-14.pdf Hope it helps. Cheers, Dave Very handy reference & big thanks :) 1 Link to comment Share on other sites More sharing options...
ozzietriker Posted August 29, 2014 Author Share Posted August 29, 2014 This was March 2013..... $700us order.......wouldn't budge on the requirements after contacting them.....their loss..... Yes I would have done the same, Lockwood can jam it! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now