Engine maintenance training by Jabiru and Rotax

[BrendAn]

I would like to do that course to buy it's only open to l2s and l4 I think.

[Blueadventures]

1 minute ago, BrendAn said:

I would like to do that course to buy it's only open to l2s and l4 I think.

Worth asking them.

[facthunter]

If it isn't full, why restrict it?  Nev

[BrendAn]

47 minutes ago, BrendAn said:

Just surprised to see an ex teacher saying that.

Hope I didn't offend U nev. Saying ex teacher. I should have said retired. A teacher is always a teacher. Retired or not.

[tillmanr]

I completed the Jabiru course some years ago and it was not restricted to L2/L4. 
It may have changed. Ask those offering the course.  

Edited February 16 by tillmanr
Additional text.

[BrendAn]

It said only open to l2s and l4 maintainers so I assumed I don't qualify. But as blue said I can ask.

[CT9000]

For what it's worth, I have done the Rotax course at Floods at Lilydale run by Wal. He is probably the most skilled Rotax bloke you will find and a great teacher. Well worth the time / money. The course not only covered maintenance but also overhaul. A lot to do in a couple of days but excellent training. I did the course a few years back so it may not be the same syllabus.  

[Blueadventures]

34 minutes ago, CT9000 said:

For what it's worth, I have done the Rotax course at Floods at Lilydale run by Wal. He is probably the most skilled Rotax bloke you will find and a great teacher. Well worth the time / money. The course not only covered maintenance but also overhaul. A lot to do in a couple of days but excellent training. I did the course a few years back so it may not be the same syllabus.  

When did you do it recently or before the covid shut down in Vic?

[Underwood]

11 hours ago, BrendAn said:

I would like to do that course to buy it's only open to l2s and l4 I think.

I suppose they think if they allow anyone then they might have to spend time explaining fundamentals and terminology that would slow things down for everybody.

Not for one moment implying you dont know your stuff, just perhaps one reason they might limit entry.

Good luck though, never hurts to ask.

[BrendAn]

2 hours ago, Underwood said:

I suppose they think if they allow anyone then they might have to spend time explaining fundamentals and terminology that would slow things down for everybody.

Not for one moment implying you dont know your stuff, just perhaps one reason they might limit entry.

Good luck though, never hurts to ask.

Yes.   That makes sense.

[CT9000]

14 hours ago, Blueadventures said:

When did you do it recently or before the covid shut down in Vic?

Yes it was several years back

[Marty_SP500 Jabiru]

Hi all

Newby here.. 

Has anyone got a link to the Jabiru L1 maintenance training?

I believe its online , but seem to not be able to find it.

 

Any help appreciated

Thanks Marty

 

[Marty_SP500 Jabiru]

Australia EastCoast - any one?

 

[BurnieM]

RAAus has an online L1 course.

It is generic and really does not give you any information about the Jabiru, or any, engine.

 

[facthunter]

Look up under "Jabiru Approved Maintainers".  Nev

[Blueadventures]

56 minutes ago, Marty_SP500 Jabiru said:

Hi all

Newby here.. 

Has anyone got a link to the Jabiru L1 maintenance training?

I believe its online , but seem to not be able to find it.

 

Any help appreciated

Thanks Marty

 

You need to contact Jabiru direct as they are the ones that schedule the courses.  There will be a cost to their line maintenance course as that what they told me back in April.  

[Marty_SP500 Jabiru]

1 hour ago, BurnieM said:

RAAus has an online L1 course.

It is generic and really does not give you any information about the Jabiru, or any, engine.

 

Hey Burnie

I cannot see this , do you have a link.

It seems Raaus is steering to Tafensw course.

[Moneybox]

As Burnie says, the RAAus online course is free and not specific to any model as L1 does not give you the authority to do in-depth engine repairs. You can do this course to allow you to maintain your aircraft legally using the manufacturers service procedures. You are supposed to get your RPL first but mine went through. The message came back that the L1 endorsement would by applied to my RPL certificate.

[Marty_SP500 Jabiru]

1 minute ago, Moneybox said:

As Burnie says, the RAAus online course is free and not specific to any model as L1 does not give you the authority to do in-depth engine repairs. You can do this course to allow you to maintain your aircraft legally using the manufacturers service procedures. You are supposed to get your RPL first but mine went through. The message came back that the L1 endorsement would by applied to my RPL certificate.

Thanks..

Help me find this course.

It seems its gone.

[Moneybox]

As Burnie says, the RAAus online course is free and not specific to any model as L1 does not give you the authority to do in-depth engine repairs. You can do this course to allow you to maintain your aircraft legally using the manufacturers service procedures. You are supposed to get your RPL first but mine went through. The message came back that the L1 endorsement would by applied to my RPL certificate.

 

https://members.raa.asn.au/learning/l1-maintenance-authority/

 

Under member training.

[BrendAn]

14 minutes ago, Moneybox said:

As Burnie says, the RAAus online course is free and not specific to any model as L1 does not give you the authority to do in-depth engine repairs. You can do this course to allow you to maintain your aircraft legally using the manufacturers service procedures. You are supposed to get your RPL first but mine went through. The message came back that the L1 endorsement would by applied to my RPL certificate.

. RPC not RPL . RPL is ga.

It is not attached to your RPC.

If you log into your member portal the l1 will be in the endorsement column and your RPC goes in the ratings column.