Roscoe

I am going as well this year, been many times over the years and love it, you are correct about thr Fan, thats exactly what i do, and donate it to the Uni when i leave

Ryan you will never get into the Hilton at Oshkosh, its pre booked every year and not that big!

Andy do you run 2 MicroAirs in your Jab, and where did you put the second Antenna?

I've had the coax Antenna re crimped at the Radio end and my Battery was low as well. Did a Radio check in the Hangar with good result so just waiting for winds to drop and check it in the air.

Thanks, was the poor crimping on the Radio end of the Antenna coax? ks

Thanks Frank, and you are running 2 Microairs?

Hi Frank, I see there are a couple of Antennas on the market for mounting within the aircraft structure. What type do you use and where do you run the coax?

Ok thanks, no idea what causes this?....over to the panel!

Sorry yes i meant what type of aircraft?

What tyoe

Mark thanks for that info. Appreciate your input

Thanks Mark, what sort of probs are we talking about, mine is under warranty

Gday, what problems did you have?

Thannks Thanks Frank. Will let everybody know next week when Radio reconnected following fixing of the crimping at the Radio end of the coax. Fingers crossed

Mine is a factory build but I am hopeful since finding the bad coax crimping tday at the radio end that we may be on to the problem. And thanks for Fin removal comments. Last resort hopefully

But also found crimping issue at Radio end of Antenna coax prior to test

Good call, yep tday tested handheld connected to the Antenna coax and tested fine. Stay tuned!

Frank yes as mentioned in another thread, i have just located a poor crimping issue at the Radio endof the Antenna coax. Will keep you posted.

Yes separate intercom but no difference with intercom turned off.

Thanks for that, so the Fin has to come completely off to get access to the Antenna?.....And have you heard of A Jab Antenna problem before?......appreciate y our input Deb

And assumed that Radio Tech checked this when Radio removed. Radio will be reconnected after another Bench check asap and i will let you know how it goes.

Mike had a look at the Radio end of the Antenna Cable today and yes,not crimped properly and BNC loose. Cant do anything on weekend but will get fixed and reconect

Frank is the Antenna difficult to get to and/or remove?