Prop

[gareth lacey]

Here is the prop from Ukraine for my build/ engine full carbon fibre with ss edge protection

[skippydiesel]

Nice!😈

[Marty_d]

One of them is going the wrong way Gareth!

(Just kidding, I know you haven't tightened them yet)

[JG3]

That's an excellent prop. The best I have tested for STOL aircraft. Results at stolspeed.com

[meglin]

This is a 1755mm (69.1") SAE-2 Right Pull Carbon for Subaru EJ25 160hp. Any results from using it?

[FlyBoy1960]

I would be checking it is rated for 160 hp. Most of them are only rated for 115 hp as a maximum. It might pay to are some questions because not all propellers are built the same

[gareth lacey]

This prop was made for my engine Meglin recieved all the specs and manufactered fit for use,he has a solid rep as a prop maker, prop has not been fitted yet engine requires mapping of ecu will be installing in the next 2 weeks

[meglin]

This propeller has been in service for many years on a gearless O-320 160hp with very harsh conditions for the blades. Operation on a geared motor has much milder conditions both in terms of rpm and torque ripple.

[BrendAn]

  On 03/06/2025 at 6:19 AM, gareth lacey said:

This prop was made for my engine Meglin recieved all the specs and manufactered fit for use,he has a solid rep as a prop maker, prop has not been fitted yet engine requires mapping of ecu will be installing in the next 2 weeks

Expand  

what was the time span from order to landing in aus.  

[gareth lacey]

Paid 50% up front and 8 weeks later prop was ready, i paid balance and prop was delivered 1 week later overall  the time was 2 months 

Edited Friday at 08:24 AM by gareth lacey

[meglin]

Juli bis Oktober.

Edited Friday at 08:24 AM by meglin

[BrendAn]

  On 06/06/2025 at 8:20 AM, gareth lacey said:

Paid 50% up front and 8 weeks later prop was ready, i paid balance and prop was delivered 1 week later overall  the time was 2 months 

Expand  

excellent .   thats great , i thought freight might have been a problem with the war going on.

[gareth lacey]

And the freight was very reasonable

[Area-51]

  On 03/06/2025 at 7:03 AM, meglin said:

This propeller has been in service for many years on a gearless O-320 160hp with very harsh conditions for the blades. Operation on a geared motor has much milder conditions both in terms of rpm and torque ripple.

Expand  

What cruise speed are these meglin props optimised for? Recreational aircraft these days are mostly split between bush stol 70-80kt and faster point to point craft of 130-160kt