Jump to content

AVOCET

Members
  • Posts

    846
  • Joined

  • Last visited

  • Days Won

    3

Everything posted by AVOCET

  1. There used to be an option on the jabs to have a low fuel light on the dash and a float in the header tank , but it had to be installed at the right height or it could come on prematurely , I had one installed on one jab I had but it was set to high in the tank and used to come on sometimes , ( scaries the passenger ) It's a good idea , if set right would give 20 ish mins of fuel remaining . I don't know if their still available . Cheers Mike
  2. I googled Philips oil , and there are a couple of lab comparison test that are worth a read Cheers
  3. Hi , what is the synthetic brand oil used in aviation ? I've only read about 50/50 blends Unless this is what you were referring to Cheers Mike .
  4. Bring it back to Narromine
  5. L LCH work great ,check out the R/tec website Cheers
  6. Pm me your email address and ill send the email I got from jabiru , it Probly hasn't been added to the web manual yet Cheers
  7. I've just done the CHT mod that jabiru recommend ,it gets rid of the 14 mm ring that goes under the spark plug that can let hot gas escape and give a high head temp reading . I was pleased that all my heads now read pretty even , I always had a high reading No3 due to leaking gas .(no more ) The mod is called ::: AVDALSR085-1 CHT mod It took about 40mins to do the 6 sensors , The hardest thing is snipping away the old 14 mm ring with sharp side cutters and not damaging the wire that's welded together at the ends .i just snipped away a bit at a time until it falls off the wire then crimping on the new ring . Cheers Mike.
  8. Is Philips oil available on Australia ? Cheers Mike
  9. That's correct for 24 lsa factory built , but not for 19 rego unless owner was the builder Mike
  10. Have you ever built a ship inside a bottle Cheers
  11. That will work , On the 230 wing there are holes in the ribs , You don't have to take the wing off , At the wing root end ,after drilling a hole in the skin where you position your lights ,you'll Have to drill a small hole Into the end rib , as this is the only solid rib . Getting the string down through the wing is not difficult , you need somthing long and thin to attach the string to . I've joined a couple or three lengths of dowel , but you can use any thing stiff . Check photo of wing rib holes This is a 250 wing , the 230 wing is similar IDE go down the leading edge as there's no restriction all the way down . Cheers
  12. Check if the balls in the middle with wings level in the cruise ,still air ,and fly it hands free , and check that the balls still level , if it goes out ,even a little , it's a rigging issue . Might be the ruder needs tweeking , or maybe a flap , It's a bit of a" think it through "situation ,but you can get it set spot on and I've found this helps no end to having balanced tanks . Cheers Mike
  13. Look at the cones , the light comming from about 3oclock , it's quite bright on the wing top , but there's no shadow ?? photo shopped for sure Cheers
  14. Carnt answer hypotheticals. I don't make the rules Cheers . As it stands now , if you want to go either Raa or VH ex . It's your choice , as long as your the builder . Cheers Mike . I don't think Raa 's going anywhere soon .
  15. I'm pretty sure the only way that works is that you have to have been the builder and have an extensive builders log that will satisfy the casa appionted approved person that you truly were the builder ,reciepts , dates , invoices , ect .and the build is of a high standard Then you would have to do the casa maintaince coarse $ aprox 600. Ish (that's with the saaa.)first year member , ( gets cheeper with each year of membership ) The MTOW would be according to the model and year it was built Cheers Mike
  16. We need a dick / h d button on this forum
  17. FACT : is a small creature that swims on the bottom of the ocean and collects shark fart bubbles and puts them in spirit levels
  18. IDE like to know who moderates the moderator ? Cheers
  19. AVOCET

    Shackles

    Tr try aircraft spruce .online catalog Don't think marine ones would be suitable without testing Cheers
  20. Gees , the guys not on the board yet and already the na Sayers are trying to crucify him , he's not running for president of USA WHO your related to and what plane you fly ,... I carnt see it , Trail by association , get real , this is Raa Not a high court appointment !
  21. Love these boonies ! I've ordered one from aero shop All done . Thanks for all your advice & help everyone . Make yourself known to me at Ausfly and lll by you all a beer , Cheers Mike
  22. That's what I said to them ! They said it was " an offer & acceptance contract " .....what do I know ! Any way they have refunded the money and I've orderd one from Melbourne Halaluhyah I might just end up with a Mr /F Cheers Mike
  23. TTT. Tolerates Toluene with. Teflon hoses
×
×
  • Create New...